Deutsches Ozeanographisches
Datenzentrum Inventur der Atair (3)-Reise 104 (DOD-Ref-No.19990085)
Inventory of Atair (3) Cruise 104 (DOD-Ref-No.19990085)

Plattform
Platform
Reise-Nr.
Cruise-No.
Zeitraum
Period
Projekt
Project
Arbeitsgebiet
Working area
Atair (3) 104 15.06.1999 - 24.06.1999   North Sea German Bight  

Fahrtleiter
Chief Scientist
Institut
Institute
Auslaufhafen
Port of departure
Einlaufhafen
Port of return
Stationskarte
Station map
Schiffsroute
Trackchart
Konig P. Bundesamt fuer Seeschifffahrt und Hydrographie Cuxhaven Cuxhaven Karte
Map
 

Ziel der Reise / Objectives of Cruise:

A physical oceanography cruise to investigate oceanographic conditions (currents, waves, resuspension/erosion) at the gas pipeline EUROPIPE I. Results are needed for better understanding what causes freespans under the pipelines. All moorings laid 17.6.99 and recovered six days later.

Messungen / Measurements

Institut
Institute
Wissenschaftler
Scientist
Anzahl
Number
Einheit
Unit
Typ der Messungen
Type of measurements
Kommentar
Comments
Daten im DOD
Data in DOD
TUHH Luttenberg C. 1 stations D01
Current meters
1X Nortek ADV current meter, near bottom no
BSH Klein Holger 1 stations D01
Current meters
2X S4ADW current meter, near bottom. 3X Aanderaa RCM9 current meter, near bottom no
TUHH Luttenberg C. 1 stations D09
Sea level measurements, incl bottom pressurerec. and inverted echo-sounders
Sea level measurements by means of four bottom pressure recorders (high sensitive) no
BSH Klein Holger 1 stations D71
Current profiler (e.g. ADCP)
2X RDP ADCP (300 HZ), bottom-mounted no
BSH Berger Ralf 1 stations D72
Instrumented wave measurements
Wavec buoy no
BSH Konig P. 1 stations D90
Other physical oceanographic measurements
Recording of temp./salinity, 2m above bottom, Seacat instrument no
BSH Konig P. 4 samples G02
Grab
Small grab sampler no
BSH Konig P. 32 stations H00
Stations
- no
BSH Frohse A. 32 stations H09
Water bottle stations
GO Multisampler (2,5l bottles) employed on up-casts at each CTD-station with calibration samples taken for salinity and SPM content (for BackScat I) no
BSH Frohse A. 32 stations H10
CTD-Stations
NBIS CTD with BackScat I (data collected on down casts) yes
BSH Frohse A. 1 stations H16
Transparency (e.g. transmissometer)
5X optical backscattering meters (OBS-3) near bottom. 2X optical backscattering meters (BackScat I) 1,5m above bottom no
BSH Frohse A. 27 samples P01
Suspended matter
SPM dry weight determined by suction-filtration through a preweighted 47 diameter 0,4 ?m pore size polycarbonate membran (Nudepore) no
BSH Frohse A. 32 stations P01
Suspended matter
GO Multisampler (2,5l bottles) employed on up-casts at each CTD-station with calibration samples taken for salinity and SPM content (for BackScat I) no
20.4.2024